Report
![[Laser cut and engrave] Wooden coaster with Halloween pumpkin design and text Trick](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/a301d98d-893e-4ce3-80ea-2cd3af3b5c18.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
trick or treat flip coin
Instructiontrick
.xcs
Application scenario
Laser processing
Machine & module
xTool P2
55WCompatibles · 10
Material used
1/8"(3mm) Cherry Plywood
3
613
Information
A fun project to use on Halloween to see iof the kids are allowed a trick or a treat
Instruction
1
Step1
Preview
To start, if you don't like the style of writing you can highlight this and change it to suit.
Next the ‘sweet’ ‘treat’ and circle are set to out put so make this element first. Ensure the cut is set to the settings of your material.
Process
2
Step2: Step 2
Now, careflluy remove the token without moving the 'jig you have just created. I did this by using a weeding tool and pushing the token out from underneath.
Flip the token over and place back into the space you go it out of.
3
Step3: Step 3
Select the circle, sweet and treat. Select them to ignore.
Get the camera to take another photo.
Now move the ignored elements out the way.
Highlight the trick elements and set to out put.
Place these over the token using the camera.
Process
4
Step4: Item is finished
Comments
