Buse Bell
Report

Wooden Christmas Puzzle for Kids

Instruction
puzzle-1.xcs
puzzle-1
.xcs
Application scenario
Laser processing、Inkjet printing (30min)
Machine & module
xTool M1 Ultra
20W
Material used
6mm Birch Plywood
3mm Basswood Plywood
122
981
Information
      ids absolutely adore wooden puzzles, and there’s no better time to introduce a festive Christmas edition filled with delightful characters! Imagine the joy of solving puzzles featuring Santa, cheerful snowmen, playful reindeer, and twinkling Christmas trees. This enchanting collection not only provides hours of fun but also sparks creativity and develops fine motor skills. It’s the perfect way to celebrate the season while creating lasting holiday memories with loved ones!
    
Instruction
1
Step1
Preview
Preview
  1. Place a 6mm plywood sheet and mark the processing area.
  2. Install the inkjet module onto the machine.
  3. Set the intensity to 100% and Pass to 1.
 



 

2
Step2
Preview
Preview
Preview
Preview
  1. Carefully remove the inkjet module and install the laser module without moving the plywood. 

 

2) Adjust the settings for laser cutting with the following parameters:

 power at 60, 

speed at 6, and 

pass at 1. 

 

Then, begin cutting.

3
Step3
Preview
Preview

Now, place a 3mm plywood sheet in the machine. Set the power to 90, speed to 10, and passes to 1. Then, begin cutting.

4
Step4
Preview
Preview

 

Place another 3mm plywood sheet in the machine to cut the last piece. Set the power to 90, speed to 10, and passes to 1.

5
Step5
Preview
Preview

Glue 2 pieces together and place a heavy material on it to seal the glue.

6
Step6
Preview

Place the 6mm painted and cut figures to the puzzle base and Here you go! Enjoy.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
6mm Birch Plywood
6mm Birch Plywood
3mm Basswood Plywood
3mm Basswood Plywood