![[Laser cut and engrave] College building miniatures](https://image-res.xtool.com/ali-res/community/making/113650e0-65ef-47c6-8222-593b0f4e3a46/363846064_577590287908194_8583397155142501687_n.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
College building miniatures
Instruction
Information
I made this building miniature with wood, form board, acrylic sheet, and vinyl.
Instruction
Step1: add the design file to xcs
I drew the design file by revit and export as dxf file.
And add this DXF to xcs.
Step2: Cut the wall
add the plywood to M1 and cut the small wall parts.
I already split all wall parts in uploded XCS file.
Step3: add the pattern to front side wall
add the pattern for front side.
I used the xtool pattern to decorate the front wall.
Step4: Cut The acrylic and add the color
Cut the acrylic and scratch the line to add some paint.
and then remove the paints on acrylic.
Some paint stay in scratched lines.
Step5: add the sing by cut the vinyl
Join the pieces of walls with wood glue.
Add some corner support dock with plywood pieces.
Step6
make the roof with form board.
I use the plywood parts as rafter.
Step7: Making the chairs and table
make the chairs and table for outside rest area.
Step8: add the sign with vinyl
cut the vinyl and stick to acrylic wall by transfer tape.
Step9: add the solar pannel
Print the solar pannel image and stick it to the roof.
Step10: Finishing
get the photos and upload them to the how-to post.
:D
Thank you so much.