HomeTemplatesDecorHome DecorDesk Decor
Chris
Report
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Laser cut and engrave Hexagonal wooden frame with treasure chest design
Laser cut and engrave Hexagonal wooden frame with treasure chest design

Catan Gold or Treasure Tile

Instruction
CatanTreasureTile.svg
CatanTreasureTile
.svg
Application scenario
Laser processing (15min)
Machine & module
xTool S1
10W
Material used
3 mm basswood
3 mm mdf
12
301
Information
      This is my take on a Settlers of Catan Gold/Treasure tile that is in the Seafarers Expansion. I made it to add to a base set that another creator made.
Instruction
1
Step1
  1. You will need to set the outside part to cut. On my S1 I use 90% to 100% power and speed 3 to 5. 
  2. The inner part, treasure chest, will need to be set to engrave or score depending on how you want it to look. For the most part I used the Xtool recommended settings for engrave or score but I recommend doing a material test to find the best settings for your machine. 
  3. After this job is complete, you will need to set the cut and engrave to no output. Then do a zero outline of the hex so that you can cut out the bottom layer of the tile. 
  4. User wood glue or super glue to attach the cutout and the bottom tile together. I suggest using a clamp to hold it tight while it sets. 
Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC BY-NC-SA