Report
Reunion ornament
Instruction20yearclassreunion
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2
55WCompatibles · 1
Accessories
xTool P2 Riser Base
xTool Smoke Purifier
Material used
12mm Basswood Plywood
3mm Red Acrylic
3mm Glitter Translucent Acrylic
13
219
Information
What a wonderful way to remember the great times you & your friends had in school!
These would even be perfect for classmate gifts!
Fully custom laser wooden ornament with acrylic!
Instruction
1
Step1
P2 laser cut settings are already saved in the file. I cut the outline of the paw print on the glitter acrylic & the actual paw print on the red acrylic. I found these settings work best for my material I used. The glue used is the Starbond Multi-Purpose Medium bond glue. This was used to glue the acrylic together & then the acrylic to the wood.
2
Step2
The engraving material is the wooden ornament. You will have to manually change that material in XCS. But these settings work best on basswood. If you'd like the engraving darker then be sure to up the power and lower the speed a bit.
Comments
Remixes
xTool Supplies Used in This Template