Report
![[Laser cut and engrave] Hand holding pink butterfly cutout decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/3f4ca605-4559-4f79-9811-8ecae2f12bb7.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Butterfly Box
InstructionButterflyBox🦋
.svg
Application scenario
Laser processing (20min)
Machine & module
xTool S1
20WMaterial used
paper
1/8"(3mm) Grey MDF Board
78
563
Information
I created this butterfly shaped box for my niece's birthday to give as a keepsake of her first year.
Instruction
1
Step1
Instructions:
In the file you will find the necessary pieces for two butterfly boxes.
1: cut the file in any type of 3mm material
2: assemble the inner box
3: after the inner box is glued, take a butterfly piece and align the box in the center of the butterfly and proceed to glue. Repeat this step on the opposite side.
optional: you can cut the outer shape of the butterfly in colored paper (in my case it was pink cardboard) to hide the color of the mdf and give it a nice color)
Comments
