Report
![[Laser cut and engrave] Snowman wooden puzzle](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b0ec555e-977f-4ae5-b186-b75961eec564.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Snowman wooden puzzle
Instructionsnowmanpuzzle
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
179
803
Instruction
1
Step1: Prep your material
Preview
- Start out by sanding your wood very well.
- In order for your print to come out well on wood you will need to prime with the a clear coat.
- For this project. I used modge podge spray.
2
Step2: Print & Laser
Preview
Preview
- Place your wood inside your machine
- Make sure you are in the inkjet printing setting in processing mode
- Print your image.
- Once it's done DO NOT MOVE your material
- replace the inkjet module with the laser module
- Change your module mode to lasering on flat surface
- Make sure all the pieces you need to cut placed placed for cutting
- Click Go to Process
3
Step3: Assembly
Preview
Preview
- Glue the frame pieces on top of the solid piece
- Add your puzzle pieces back inside the puzzle
- spray with a clear sealer
- I used a thin layer of gloss modge podge spray
- and once dried i sprayed a thin layer or high shine modge podge
Comments
