HomeTemplatesDecorHome DecorShelves & Holders
stephcreated
Report
Laser cut and engrave,Inkjet printing
Project made with xTool M1 Ultra machine for Christmas.
Project made with xTool M1 Ultra machine for Christmas.
Laser cut and engrave,Inkjet printing
Project made with xTool M1 Ultra machine for Christmas.
Laser cut and engrave,Inkjet printing
Project made with xTool M1 Ultra machine for Christmas.
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing
Laser cut and engrave,Inkjet printing

Christmas Frame standee

Instruction
ChristmasFrameStandee.xcs
ChristmasFrameStandee
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
20W
Compatibles · 10
Material used
3mm Basswood Plywood
24
335
Instruction
1
Step1: Open File in XCS
Preview
  • Open in the file in XCS
  • Optional:
    • I have used my inkjet module to add some christmas gnome to this frame. You can do this as well if you have an M1 Ultra
    • If not, you can skip this part or add anything else you might want. 
2
Step2: Laser
Preview

Automeasure your material and send to laser

3
Step3: Assembly
Preview
Preview
  • Glue the thinner frame on top of the solid piece
  • Glue the frame with the engraving on top of those two pieces
  • If you printed some christmas flare glue those to your frame as well. 
  • I finished this by spraying some modge podge on my frame.
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY