stephcreated
Report

Christmas Tree standee

Instruction
TreeStandee.xcs
TreeStandee
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
20W
Compatibles · 10
Material used
3mm Basswood Plywood
5
275
Instruction
1
Step1: Prep your material
Preview
  • Start out by sanding your wood very well.
  • In order for your print to come out well on wood you will need to prime with the a clear coat.
    • For this project. I used modge podge spray.
2
Step2: Printing & Lasering
Preview
  • Place your wood inside your machine
  • Make sure you are in the inkjet printing setting in processing mode
  • Print your image.
  • Once it's done DO NOT MOVE  your material
    • replace the inkjet module with the laser module
  • Change your module mode to lasering on flat surface
  • Click Go to Process

Send your other pieces to the laser that have not cut yet

3
Step3: Assembly
Preview
Preview
Preview
  • Spray your printed piece with some clear top coat
  • Glue your printed pieces inside the tree outline as shown.
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood