Report
![[Laser cut and engrave] Ugly Sweater Magnet](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/204207a3-855c-4fe7-8cbb-38065ab37c03.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Ugly Sweater Magnet
InstructionUglySweaterOrnament
.xcs
Application scenario
Laser processing
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
19
254
Information
Make this ugly sweater frame to hang on your tree
Instruction
1
Step1: Prep you material
Preview
- Start out by sanding your wood very well.
- In order for your print to come out well on wood you will need to prime with the a clear coat.
- For this project. I used modge podge spray.
2
Step2: Printing and Lasering the ugly sweater
Preview
- Place your wood inside your machine
- Make sure you are in the inkjet printing setting in processing mode
- Print your image.
- Once it's done DO NOT MOVE your material
- replace the inkjet module with the laser module
- Change your module mode to lasering on flat surface
- Click Go to Process
- Once that is done, laser your other pieces as well now that the laser module is in.
- You can change out the wood to some that aren't treated with the modge podge if you wish.
3
Step3: Assembly
Preview
Preview
Preview
- Glue you pieces with the half first on top of the solid piece
- glue your ugly sweater print on top of those two pieces
- Add a photo and some string and hang it on your tree
Comments
