HomeTemplatesDecorHome DecorShelves & Holders
opticalearth
Report
[Laser cut and engrave] Rugby Ball Snack Platter
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Rugby Ball Snack Platter
[Laser cut and engrave] Rugby Ball Snack Platter
[Laser cut and engrave] Rugby Ball Snack Platter
[Laser cut and engrave] Rugby Ball Snack Platter

Rugby Ball Snack Platter

Rugby Ball Snack Tray.jpg
Rugby Ball Snack Tray
.jpg
Application scenario
Laser (240min)
Machine & module
xTool D1 Pro
20W
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
40
1085

Information

      The idea behind this project was to offer rugby fans a unique way to have their snacks available during a game in front of the TV.

This entire product was made using my xTool D1 Pro 20W. The base is 3mm basswood plywood and the top part is cut from 19mm pine. The sides were sanded to remove the laser marks and then it was glued together. After that I used walnut stain and varnish to finish it off.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
3mm Basswood Plywood