Report
![[Laser cut and engrave] Xmas deco hanger](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/49051db3-6dad-4dd7-a40e-6785b2e19e0a?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Xmas deco hanger
Instructiondreamxmashanger
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
30
1037
Information
I got such a beautiful engraving on the star by chance
that was because i first just cut the star and then thought
I would engrave this
I put it back in and instead of cutting I chose engraving and process again
the engraving was with 50 lines per cm and highest speed
maybe the wood was not quite straight anymore
unfortunately I can't say exactly
Instruction
1
Step1: XCS
Preview
Preview
i painted the signs white in advance with a white stain
the blue is engraving
the sign with the mountains took longer because everything is engraved
that's why i have also redrawn the lines per cm and increased the speed
but still strong enough because the color has to go down again
2
Step2: assemble
Preview
Preview
Preview
the little moon is painted gold
take a string and insert it into the hole in the bottom shield
make a knot on the back so that the cord can no longer slip through
then thread the cord into the next sign from the front and out again at the top
do the same with the next sign
the same with the star
do the same on the other side with a cord
at the end put both cords through the hole at the same time
Comments
