Report
![[Laser cut and engrave] K-12 Picture Frame (P2)](https://image-res.xtool.com/ali-res/community/making/c352aaae-049c-453c-898d-80f0886c3c7b/samplethumb.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] K-12 Picture Frame (P2)](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
K-12 Picture Frame (P2)
InstructionK-12PictureFrame_MonkeyWoodworks
.xcs
Application scenario
Laser (30min)
Machine & module
xTool P2
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
837
8289
Information
This is a picture frame for school pictures designed to be made on the P2.
Instruction
1
Step1: Gather Material
- Wood
- The overall project size is 11.5" tall x 17" wide.
- For this project you will need (2) boards slightly larger than the dimension above so you can cut the final size on your laser.
- The thickness of the wood is up to you. I personally prefer the 1/4" Birch plywood.
- The overall project size is 11.5" tall x 17" wide.
- Hardware
- To hold the back plate on, I am using “metal picture turn button fasteners” (Amazon)
- https://www.amazon.com/Pieces-Picture-Fasteners-Hardware-Backing/dp/B0B9BTZNDN?&linkCode=ll1&tag=amzmww-20&linkId=c5cd8c4145c53d4b529faf01951af24f&language=en_US&ref_=as_li_ss_tl
- To hang the frame, I am using a “no nail sawtooth hanger” (Amazon)
- https://www.amazon.com/Sawtooth-Picture-Hangers-No-Nail/dp/B0195H9G1W?&linkCode=ll1&tag=amzmww-20&linkId=9dc4dcfc03f9979390f4fe5cab149650&language=en_US&ref_=as_li_ss_tl
- To hold the back plate on, I am using “metal picture turn button fasteners” (Amazon)
- Glue
- Any type of wood glue will work. You can also use CA glue (super glue).
2
Step2: Familiarize Yourself with Project File
The XCS project file contains (3) tabs.
- [ABOUT]
- This is just some basic information about the project.
- [Front Plate]
- This is the front piece of the project.
- Note that you have two options here. You can engrave directly on the front piece or you can use the scrap that comes from cutting #12 and make a name plaque to glue on later. The added name plaque adds additional depth to your project.
- [Back Plate]
- This is the back piece of the project.
- The resulting cut will be two separate pieces.
- One piece will be glued to the back of the font piece.
- One piece will be kept loose.
- [Assembly]
- This shows you how to put the project together.
3
Step3: Process Front Plate
- Set your first blank material in the P2.
- Select the [Front Plate] tab in XCS.
- Decide which option of Front Plate you want to use and move that object into the working area of XCS.
- Refresh the P2 to see your material in XCS.
- Using the cameras, line up your project to fit the material.
- Set the correct material thickness or use the XCS focus.
- Turn on the Output of the object(s) you want to process.
- Set your cut/engrave power/speed settings based on your material.
- Process the piece.
4
Step4: Process Back Plate
- Set your next blank material in the P2.
- Select the [Back Plate] tab in XCS.
- Refresh the P2 to see your material in XCS.
- Using the cameras, line up your project to fit the material.
- Set the correct material thickness or use the XCS focus.
- Turn on the Output of the object(s) you want to process.
- Set your cut/engrave power/speed settings based on your material.
- Process the piece.
5
Step5: Assembly
Assemble the pieces as instructed on the [Assembly] tab of the XCS project file using the pictures as a reference.
6
Step6: Add Final Touches
Once assembled you can leave the project as is or you can add your own touch to the piece. Some options are:
- Leave the finished product natural and protect it with a clear coat.
- Stain the finished product, wait 24 hours (minimum), then protect it with a clear coat.
- Paint the finished product
Comments
