Report
Joy Shelf Sitter
Instruction56JOYShelfSitter
.xcs
Application scenario
Laser processing、Inkjet printing (30min)
Machine & module
xTool M1 Ultra
10W, Ink module, 20WCompatibles · 8
Material used
3mm Basswood Plywood
61
646
Information
The red letters and wreath are printed on using the M1 Ultra inkjet module. The project is 1 layer with a stand.
Bill of Materials
xTool parts
1/8" Basswood Plywood Sheets (6pcs)/44325
x1
* Currently only available in US store
Instruction
1
Step1: Print the Designs
Preview
Note: If you opened the XCS file that comes with this tutorial, all settings are already set-up for use with the M1 Ultra 10W.
- Open the file in xTool Creative Space.
- Load the inkjet module in your machine.
- Place the wood on top of the triangular prisms. Secure with tape or limit blocks, so that nothing moves.
- Change the Mode to Inkjet printing on the top bar in XCS.
- Print the file at 60% intensity.
2
Step2: Laser Cut
Preview
Preview
If your machine has been calibrated correctly, you should be able to laser cut the designs out without the need to manually frame.
- Switch the inkjet module to the laser module.
- Change the Mode to Lasering on flat surface on the top bar in XCS.
- Turn the output to the bitmap images/designs to OFF.
- Set the black cut lines to 100 Power and 4 Speed for Cut. I only need 1 Pass at this setting.
- Measure the distance. I got 14mm as my distance for 3mm plywood sheet on top of the triangular prisms.
- Click the green Process button on the top right of the screen.
- A preview will be shown. Click the green Start button (top right) to send it to the machine.
- Press the button on the M1 Ultra machine to start.
Comments
Remixes
xTool Supplies Used in This Template