HomeTemplatesTools & Special MaterialsJigs
Allen the maker
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Painting support wedge!

Instruction
paint wedges.dxf
paint wedges
.dxf
Application scenario
Laser (1min)
Machine & module
xTool D1
10W
Material used
3mm Basswood Plywood
128
1582
Information
      These handy little rectangle wedges are used to support your pieces to be painted off of the work surface! Very handy and easy to use. The file supports 3mm, 6mm, 1/4", and 1/8" material!
Instruction
1
Step1: Cut the 2 pieces of the wedge
Preview

Cut out enough pairs of wedges to prop the parts to be painted!

2
Step2: Assemble the wedge
Preview
Preview

Slide the 2 pieces together to firm the assembled wedge!

3
Step3
Preview
Preview

Set the assembled wedges on the work surface in an orientation that will hold the piece to be painted!

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1
3mm Basswood Plywood
3mm Basswood Plywood