To start, place the vennered wood into the laser. Ensure that you select the backing part of the toadstool and set the fronts to input so that they do not cut. 

Set your settings for the material used and then process. 

Remove the back of the toadstools from the machine

No place the MDF into the laser. Deselct the backs and select the front of the design and set to out put. Ensure that the cut is set to the material you are using.

Cut the front of the toadstools.

Once cut re ove from laser bed and place on a board.

Spray the front of the toadstools white and let dry

Once the base layer is dry you can paint the toadstools any colour you like and add the detail needed.

Once the paint is dry, glue the front of the toadstools onto the back, leave to dry.

Once dry thread string through the holes.

You can now hang the bunting up and enjoy