![[Laser cut and engrave] Toadstool bunting](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/23cb4f82-b7ea-4c58-ad4c-e4687579bef4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Toadstool bunting
Instruction
Instruction
Step1: Cutting the back
To start, place the vennered wood into the laser. Ensure that you select the backing part of the toadstool and set the fronts to input so that they do not cut.
Set your settings for the material used and then process.
Remove the back of the toadstools from the machine
Step2: Cutting the front
No place the MDF into the laser. Deselct the backs and select the front of the design and set to out put. Ensure that the cut is set to the material you are using.
Cut the front of the toadstools.
Once cut re ove from laser bed and place on a board.
Spray the front of the toadstools white and let dry
Step3: Painting
Once the base layer is dry you can paint the toadstools any colour you like and add the detail needed.
Step4: Assemble
Once the paint is dry, glue the front of the toadstools onto the back, leave to dry.
Once dry thread string through the holes.
Step5: Hanging
You can now hang the bunting up and enjoy
