HomeTemplatesTools & Special MaterialsJigs
jpannekoek
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.

Teaspoon Jig and engraving

Instruction
Jig-teaspoon-m1.xcs
Jig-teaspoon-m1
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
45
720
Information
      This teaspoon Jig is suited for a xtool M1. Place it on the baseplate.
Instruction
1
Step1: Cut out the Jig
Preview
  1. Engrave and Cut out the Jig.
2
Step2: Assemble the Jig
Preview
Preview
  1. Glue the backside of the Jig.
  2. Clamp the back to the glued Jig.
3
Step3: Engrave the teaspoon
Preview
Preview
Preview
Preview
  1. Coat the teaspoons with marking spray or marking powder
  2. Dry for 5 minutes
  3. Put the teaspoon in the Jig and refresh the camera.
  4. Make your tekst fit on the teaspoon, then choose framing. When you have framed oke, then choose the smartfill option.
 
Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY