HomeTemplatesDecorHome DecorLighting
Atomm
Report
Laser cut and engrave
Project made with xTool P2 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave

12 Sided Wooden Lampshade

Instruction
dodecahedron.xcs
dodecahedron
.xcs
Application scenario
Laser
Machine & module
xTool P2
Compatibles · 9
Material used
3mm Basswood Plywood
563
6269
Information
      In this how-to tutorial, you will learn how to create a 12 sided wooden lampshade that provides a warm and nostalgic ambiance for your bedroom.
Bill of Materials
xTool parts
atomm-bom-image
1/8" Basswood Plywood Sheets (6pcs)/44325
x1

* Currently only available in US store
Instruction
1
Step1
Preview

 

Import the drawings into XCS software. Four canvases are built into the drawing file, which are the drawings of two wooden lampshades.

Adjust the drawings to the ideal position of your canvas.

Ensure that the material is correctly placed and adjust the settings accordingly.

Next, click on auto-measure and then process to frame the cutting range. Once completed, you can begin cutting.

2
Step2
Preview

 

Cut all pieces as shown in the picture.

3
Step3
Preview
Preview

 

Assemble all 12 sides of the lampshade using these small pieces you cut out.

NOTE

 

After the assembly is completed, it is best to use woodworking glue to strengthen the joints.

Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC