Report
Wooden Christmas Door Decorations
InstructionChristmasDoorDecorations
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2
55WMaterial used
3mm Walnut Plywood
114
1378
Information
We welcome every visitor with the warmest of hearts and hope that our home will bring you a touch of warmth and joy. This Christmas, let's share love and spread happiness together, starting from this small doorplate! May it become a bridge connecting each other's hearts and let the happiness fill every space, come and create it together!
Bill of Materials
xTool parts
1/8" Walnut Plywood Sheets (6pcs)/44111
x1
* Currently only available in US store
Instruction
1
Step1: Import the XCS file
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
P2
processing type：cut
power: 100
speed: 16
pass: 1
2
Step2: Apply the masking tape
Preview
Preview
Before starting to cut the board, we can paste a layer of paper on the surface of the board to prevent carbonized dust from sticking to the surface of the board.
3
Step3: Laser cutting
Preview
Put the wooden boards into the machine separately, refresh the page, click on the distance measurement, adjust the position of the pattern, and cut the pattern.
processing type：cut
power: 100
speed: 16
pass: 1
4
Step4: Clean the masking tape
Preview
After cutting, carefully remove the parts and clean the masking paper on the surface of the parts
5
Step5: Apply wood wax oil
Preview
The cut wood parts of the stacked ornaments are coated with wood wax oil
6
Step6: Assemble
Preview
Assemble the cut wooden parts of the pendulum separately.
Thus you have finished assembling the wooden Christmasornament, place him in your home for decoration!
Comments
Remixes
xTool Supplies Used in This Template