Report
![[Laser cut and engrave] Multiplication table making by XCS](https://image-res.xtool.com/ali-res/community/making/26bcc65c-1207-4266-ae89-38e650cefe47/358709200_1332980090969567_3643594488637500259_n.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Multiplication table making by XCS
Instructionmultiplication Table Final
.xcs
Application scenario
Laser (60min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
955
9210
Information
All designs made by XCS except the top 2 images.
Educational tool.
Instruction
1
Step1: Start Design
Preview
Start the rounded square drawing.
Add the rounded square and size it.
2
Step2: add array to table colulms
Preview
add grid array setting as shown in the picture
3
Step3
Preview
Preview
Add the numbers of multiplication.
And select all the rounded squares and select all numbers of the first column by shift + click.
click align verticle and horizontal center.
select other columns and numbers to align in the same way.
4
Step4: add the image file
Preview
Add the image file and make an outline for cutting the edges.
5
Step5: draw the lines
Preview
Draw the images by lines tool for the slider.
6
Step6: cut the board and slider
Start cutting the board as I shown setting.
I use the 7-speed and 2 cuts because the plywood was a little cut, this setting help me out to complete the cut.
7
Step7: assembly the drawer
Preview
assembly the drawer by wood glue.
sending a little and finish with the 2x cote spray.
Get a useful educational toy.
Thank you
Comments