HomeTemplatesDecorHome DecorWall Art
Xgravings
Report
[Laser cut and engrave] Owl in Trees 3D Effect Deep Relief
Project made with xTool D1 machine for Laser cut and engrave.

Owl in Trees 3D Effect Deep Relief

Instruction
3DOwl.xcs
3DOwl
.xcs
Application scenario
Laser processing (150min)
Machine & module
xTool D1
10W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
327
1887

Information

      This is an image of an owl in the middle of a forest, generated using Artimind.

Instruction

1

Step1: Place Plywood in Lasering Area

Owl in Trees 3D Effect Deep Relief instruction: step 1 - Place Plywood in Lasering Area
Preview

Place the plywood in the lasering area, making sure it is straight with the edge of the laser head.

2

Step2: Begin Lasering

Owl in Trees 3D Effect Deep Relief instruction: step 2 - Begin Lasering
Preview

After making sure the laser head is the proper distance away from the material, begin the lasering process.

3

Step3: Sanding

Owl in Trees 3D Effect Deep Relief instruction: step 3 - Sanding
Preview

Using some fine grit sandpaper, lightly sand the piece.

Comments

Remixes

xTool Supplies Used in This Template

xTool D1
xTool D1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood

License

CC BY
This work contains AI-generated content.