Report
![[Laser cut and engrave] the last supper](https://image-res.xtool.com/ali-res/community/making/84bd22c3-9b87-4267-8f87-b5f7ca5ade80/image_17184001.JPG?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
the last supper
Instructionlast supper 1
.jpg
Application scenario
Laser (1min)
Machine & module
xTool D1 Pro
10WMaterial used
1/8"(3mm) Basswood Plywood
1/8"(3mm) Cherry Plywood
3mm Basswood Plywood
3096
27546
Information
this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look
Instruction
1
Step1
this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look
Comments