Report
3D Wooden pumpkin stand ornament
InstructionWoodenpumpkinornament
.xcs
Application scenario
Laser processing、Inkjet printing (60min)
Machine & module
xTool M1 Ultra
10WCompatibles · 9
Material used
3mm Basswood Plywood
87
1542
Information
Pumpkin shaped wooden decorations, they are beautiful and colorful, they are very good home decoration ornaments, perfect for placing in the home to create a warm atmosphere, come together to make it！
Instruction
1
Step1: Import the XCS file
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
M1 ultra
processing type：Cut
mode: laser cutting 10w
power: 100
speed: 4
pass: 1
Processing type: inkjet printing
Intensity：60
pass：2
2
Step2: Install the inkjet module
Preview
First of all, you need to install an inkjet module on the machine
3
Step3: Inkjet printing
Preview
Preview
Put the wooden board into the machine, refresh the page, click the distance measurement, adjust the position of the pattern, and perform inkjet, do not move the wooden board after the inkjet printing is completed.(The part that needs to be processed by laser will not be recognized in inkjet printing mode, and you can choose whether to hide it or not, but be careful not to delete or move it to ensure accuracy)
Processing type: inkjet printing
Intensity：60
pass：2
4
Step4: Laser cutting
Preview
Preview
Remove the inkjet module and replace it with a laser module, do not move the board, and put masking paper on the board. Switch the laser engraving mode on the interface, turn off the color pattern execution, click the ranging, and cut.
processing type：Cut
mode: laser cutting 10w
power: 100
speed: 4
pass: 1
5
Step5: Inkjet printing
Preview
Preview
Put the wooden board into the machine, refresh the page, click the distance measurement, adjust the position of the pattern, and perform inkjet, do not move the wooden board after the inkjet printing is completed.(The part that needs to be processed by laser will not be recognized in inkjet printing mode, and you can choose whether to hide it or not, but be careful not to delete or move it to ensure accuracy)
Processing type: inkjet printing
Intensity：60
pass：1
6
Step6: Laser engraving, cutting
Preview
Preview
Remove the inkjet module and replace it with a laser module, do not move the board, and put masking paper on the board. Switch the laser engraving mode on the interface, turn off the color pattern execution, click the ranging, and cut.
processing type：Cut
mode: laser cutting 10w
power: 100
speed: 4
pass: 1
7
Step7: Laser cutting
Preview
Preview
Remove the inkjet module and replace it with a laser module, do not move the board, and put masking paper on the board. Switch the laser engraving mode on the interface, turn off the color pattern execution, click the distance measurement, and perform engraving, filling and cutting.
processing type：Cut
mode: laser cutting 10w
power: 100
speed: 4
pass: 1
8
Step8: Clean the masking tape
Preview
Preview
After cutting, carefully remove the parts, and clean the surface of the parts, so that we have the parts needed for the post-it boards.
9
Step9: Adhesive part
Preview
Preview
Preview
2 More images
The individual parts are glued together using super glue
Comments
Remixes
xTool Supplies Used in This Template