HomeTemplatesDecorHome DecorShelves & Holders
Atomm
Report
[Laser cut and engrave] Annular Backflow Incense
Project made with xTool D1 machine for Laser cut and engrave.

Annular Backflow Incense

Instruction
xtool_xcs_cases_Annular Backflow Incense.xcs
xtool_xcs_cases_Annular Backflow Incense
.xcs
Application scenario
Laser
Machine & module
xTool D1
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
79
1258

Instruction

1

Step1

Annular Backflow Incense instruction: step 1 -
Preview

STEP1.Import designing documents and verify the size,processing position and processing mode.

Attention:The documents of pictures are designed by 3mm basswood plywood. If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.

 

 

 

 

 

 

 

2

Step2

Annular Backflow Incense instruction: step 2 -
Preview
Annular Backflow Incense instruction: step 2 -
Preview

STEP2.Assemble same componentGlue two same component togetherAssemble the wholePaste double-layer components in order from the picture,then inserting small nails.

 

3

Step3

Annular Backflow Incense instruction: step 3 -
Preview
Annular Backflow Incense instruction: step 3 -
Preview

STEP3.Spray /PaintSpray the second time after one hour when using lacquer.

Comments

Remixes

xTool Supplies Used in This Template

xTool D1
xTool D1
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood