HomeTemplatesOffice & StationeryBusiness Card
hyjax-
Report
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool S1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Vertical Business Card Display

Instruction
BCStandBASE.eps
BCStandBASE
.eps
Application scenario
Laser processing (10min)
Machine & module
xTool S1
40W
Material used
6mm and 3mm Acrylic
18
334
Information
      I needed a simple but effective way to display vertical business cards, most business card displays I could find were designed for horizontal card designs so I created my own, the card display works for both vertical and horizontal designs.
Instruction
1
Step1: Cut Parts
Preview

Cut Base from 6mm Acrylic & cut Supports from 3mm Acrylic.

Colour choice is up to you.

2
Step2: Assembly
Preview

Once all parts are cut, the support pieces cut from 3mm Acrylic should just press fit into place by hand.

3
Step3: Display
Preview

When parts have been assembled you are now ready to display your personal business cards in your office, store, trade show or wherever you may please.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1

License

CC BY-NC-SA