Report
![[Laser cut and engrave] Simple DIY Paintable Halloween Banner](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/69770953-5abd-4c04-931c-d37400919081?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Simple DIY Paintable Halloween Banner
Instructionhalloweenbanner
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
10WMaterial used
string
1/8"(3mm) Basswood Plywood
39
443
Information
Just A simple halloween, banner, you can paint it or use it just plain wood. it can be a craft to complete with kids and then hang up!
Instruction
1
Step1: Engrave And Cut
Preview
Engrave Black Layer, use whatever specifications you would normally use to get as deep as you would like on your outline.
- if you would like to paint your outline black or any other color, use painters tape over the bare wood and engrave over the painters tape, then paint the areas that are engraved, and remove tape.
Cut the red layer which includes the outline of the shapes, and the holes to pull your string through.
2
Step2: Paint (optional)
Paint each piece if you would like. I find that using paint markers makes this step much easier.
3
Step3: String
Preview
Pull your string through each hole and hang your banner!
Comments
