HomeTemplatesDecorHome DecorDoor Sign
Gena
Report
Laser cut and engrave
Project made with xTool P2 machine for Christmas.

Christmas Sign - Baby its Cozy Inside

Instruction
1Babyitcozyinside.xcs
1Babyitcozyinside
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool P2
55W
Compatibles · 7
Material used
6mm MDF
3mm MDF Board
100
854
Information
      I made a fun sign as a twist on "Baby it's Cold Outside" and just as I was about to post I realized I left off the punctuation for "it's" so I edited the XCS file I am sharing, and it is correct now.
Instruction
1
Step1: Make the Cuts - 15 Minutes
Preview

Cut words - Power 65 and Speed 12

2
Step2: Paint Base
Preview
  1. Paint the base coat and let dry.
  2. Paint the second coat with a contrasting color and use a wood graining tool for a natural wood effect and let dry.
  3. Spray clear coat if planning to hang outside.
3
Step3: Paint and glue together
Preview

Be sure to clear coat the words for a glossier finish and to protect it if hanging outside.

I am going to embellish it with a beautiful bow but still waiting for my Christmas ribbons to arrive from craftoutlet.com.

This is a quick project; the longest part is waiting for the paint to dry.

Comments
Remixes
xTool Supplies Used in This Template
xTool P2
xTool P2
6mm MDF
6mm MDF
3mm MDF Board
3mm MDF Board

License

CC0