HomeTemplatesDecorGardening & Outdoor Decor
station22woodworking
Report
[Laser cut and engrave] 5 tier planter with personalization
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] 5 tier planter with personalization
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] 5 tier planter with personalization
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] 5 tier planter with personalization
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] 5 tier planter with personalization
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization
[Laser cut and engrave] 5 tier planter with personalization

5 tier planter with personalization

basil.xcs
basil
.xcs
Application scenario
Laser (2min)
Machine & module
xTool D1 Pro
20W
Compatibles · 11
Material used
1/8"(3mm) Basswood Plywood
45
2264

Information

      I make a 5 tier planter with personalization these were made on cedar wood and the engraving is as easy as can be just make sure the sanding is done first after it was sanded I burned the images then cleaned with a piece of a paper bag and alcohol.
Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood