Report
![[Laser cut and engrave] Layered Christmas Shadow Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/32b436cd-e8bc-43b8-a7a6-a540aa9888ea?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Layered Christmas Shadow Box
Instructionlayeredmerrychristmas
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool M1 Ultra
20WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
24
578
Information
Need some christmas decorations for your home? Consider this layered christmas sign. The shadow box was purchased on amazon.
Instruction
1
Step1: Open file in XCS
Preview
- Open in the file in XCS and prepare for laser
- Make sure you measure the inside of your shadow box and resize project accordingly if need be.
- This design outer dimensions are sized at 7.5" for the 8" shadow box I purchased on Amazon.
2
Step2: Laser
Preview
- Place your material in the laser and select your correct material settings
- auto measure your material
- cut out each layer
3
Step3: Paint & Assembly
Preview
Preview
- Paint your layers
- I chose to paint the back layer black, the text red, tree green and the rest white.
- I didn't glue my layers together before inserting into the box but you can do that and my shadow box is deeper than my design so I had to had some spacers on the back so it wouldn't move around.
- I layered them starting with the bottom
- black solid piece
- red merry christmas
- white santa sleigh
- green trees
- white plain frame on top
Comments
