HomeTemplatesDecorHome DecorShelves & Holders
Marc
Report
[Laser cut and engrave] Small box
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Small box
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Small box
[Laser cut and engrave] Small box
[Laser cut and engrave] Small box
[Laser cut and engrave] Small box
[Laser cut and engrave] Small box

Small box

Instruction
box.xcs
box
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool P2
55W
Compatibles · 8
Material used
1/4"(6mm) MDF
53
597

Information

      Small box for storing sewing materials

Instruction

1

Step1

Small box instruction: step 1 -
Preview

The box size is: 220mm L * 140mm H * 90mm D // 6mm MDF - Panel size minimum 498mm * 296mm

When assembling the box, please pay attention to the squareness. I would recommend wood glue for gluing.

For the two cover strips “d1”, make sure that there is always 6mm space from the edge. These should be attached to the lid in the glue field.   

Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
1/4"(6mm) MDF
1/4"(6mm) MDF

License

CC BY-NC-ND
This work contains AI-generated content.