HomeTemplatesDecorHome DecorWall Art
craigagood
Report
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool F1 Ultra machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Multi Color Hummingbird Engraving using Powder Coat for colors on Basswood

PowdercoatcoloredHummingbird.xcs
PowdercoatcoloredHummingbird
.xcs
Application scenario
Laser processing (25min)
Machine & module
xTool F1 Ultra
20W
Compatibles · 8
Material used
3mm Basswood Plywood
114
1444
Information
      Engraved and scored with two passes to start then turned off all of those layers and turned on each powder coat layer one at a time cleaning off the residue after every layer before going to the next layer.
Comments
Remixes
xTool Supplies Used in This Template
xTool F1 Ultra
xTool F1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC