HomeTemplatesFashion & WearablesJewelry
Ezryn
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Soot Sprite Earrings

Instruction
SootSpritexToolComp.xcs
SootSpritexToolComp
.xcs
Application scenario
Laser processing (10min)
Machine & module
xTool D1 Pro
20W
Compatibles · 8
Material used
3mm Pine Plywood
39
571
Information
      Fun and colourful, these soot sprite or susuwatari earrings inspired by the movie 'Spirited Away' will bring a bit of whimsy into your life!
Instruction
1
Step1: Cut wood

Using the xcs file provided, engrave and cut the wood. For engraving, I like to set my parameters to 75% power and 250 speed.

2
Step2: Paint the wood

Paint the wood your desired colours.

3
Step3: Assemble

Attach a stainless steel stud back to one of the stars and the sprite with one connecting hole. Then, assemble your earrings with jump rings. I find that 5mm and above works best for jump rings.

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Pine Plywood
3mm Pine Plywood

License

CC BY-NC