afasciolo
Report

Forever in Our Hearts

Instruction
ForeverinOurHearts.xcs
ForeverinOurHearts
.xcs
Application scenario
Laser processing (8min)
Machine & module
xTool M1
10W
Material used
3mm Basswood Plywood
Cardboard
60
540
Information
      This holiday season, honor the memory of a beloved pet or a dear friend with this Forever in Our Hearts Christmas ornament. A beautiful way to celebrate the holidays while holding onto the memories that remain forever in our hearts.❤️
    
Instruction
1
Step1: Design
Preview
Preview
Preview
3 More images

The holidays are often a time when we gather and reflect on the people and/or pets who have been a significant part of our lives, and their absence can feel even more profound during these moments. That's why I wanted to create the Forever in Our Hearts ornament as a way to provide comfort and remembrance for that beloved pet or a dear friend this holiday season. 

STEPS:

  • I started with a simple wing design and added the text Forever in Our Hearts using Abril Fatface font for a bold, clear look. 
  • Then, I created an outline for the wings, which forms the base of the ornament. 
  • To make the text stand out, I made a 5mm outline around it (no inner outline) and subtracted that from the wings, so it’s easy to read.
  • For the hanging part, I used two circles, subtracted the smaller one from the bigger one, and attached it to the base. 
2
Step2: Process and Assemble
Preview
  • Engrave and cut the ornament in your laser machine. Using the material of your choice. It could also be a colorful basswood or acrylic.
  • After cutting, thread a piece of twine or festive ribbon through the hole, and you're all set!

 

If you like my project, please leave me a thumbs up or a comment. Your feedback will make my day! :)

Please note that all settings mentioned are specific to XTool M1, so be sure to check the settings on your machine, as they may differ.

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood