Benkei
Report

Eine Darth Vader Lampe | A Darth Vader lamp

Instruction
DV.xcs
DV
.xcs
Application scenario
Laser processing (180min)
Machine & module
xTool M1
10W
Accessories
xTool M1 Air Assist Set
Material used
Rectangle Letter Tags
3mm Basswood Plywood
0.1mm Colored Glossy PVC Sheet
1mm White Acrylic
99
1119
Information
      Eine Deko Lampe   |  A decorative lamp
    
Instruction
1
Step1: Download
Preview

Downloadet euch die Datei und los gehts!
Ich hab die Erfahrung gemacht das es beim ersten mal super geklappt hat und beim zweiten Versuch musste ich etwas mit dem Cuttermesser nach arbeiten. Denke es lag am Material was teil einen kleinen Schwung hatte. im Großen und ganzen hat es aber immer hingehauen! ;D

– – – 

Download the file and off you go!
I made the experience that it worked great the first time and on the second try I had to work a bit with the cutter knife. I think it was due to the material, which sometimes had a little momentum. but on the whole it always worked! ;D

2
Step2: Crate
Preview
Preview
Preview
Preview

Jetzt geht es zum schneiden der Teile für die Box.
Nach dem schneiden einfach zusammen kleben!
dann sieht es so aus.

– – – 

Now it's time to cut the parts for the box.
After cutting, just glue them together!
Then it looks like this.
 

3
Step3: Frame
Preview
Preview

Jetzt kommen wir zum Rahmen und dem mittelsteg

– – – 

Now we come to the frame and the center bar

4
Step4: Darth Vader
Preview
Preview

Nun zum Hauptteil, nach dem schneiden sieht es so aus wie auf dem Bild.

– – – 

Now to the main part, after cutting it looks like in the picture.

5
Step5: Spacer
Preview
Preview

Diese Abstandshalter habe ich gemacht damit man nach belieben das bild im innenbereich verstärken kann

– – – 

I made these spacers so that you can amplify the image indoors as you like

6
Step6: Acryl
Preview

Und nun zu den Acryl Schnitten, sie sind unterschiedlich groß weil sie nur Ihre Bereiche bedecken auf der rückseite des Bildes. Hier fehlt mir ein Bild ... naja aber es ergibt sich ja von selbst . Bedeckt beim bekleben die Bereiche die in der jeweiligen Farbe gedeckt werden sollen ;)

– – – 

And now for the acrylic cuts, they are different sizes because they only cover your areas on the back of the picture. I'm missing a picture here ... well, but it will happen by itself. When gluing, covers the areas that are to be covered in the respective color ;)

7
Step7: Rdy for Paint
Preview

Alles zusammen gepackt und ab in meine Werkstatt zum sprühen!

– – – 

Everything packed together and off to my workshop to spray!

8
Step8: Final steps
Preview
Preview
Preview
Preview

Hier hab ich alles in schwarz gesprühr und ein paar Sterne gab es auch noch dazu!
Danach die beiden Acryl Folien befestigt / geklebt.
ich habe auch ein kleines Loch gebohrt für eine Beleuchtung

– – – 

Here I sprayed everything in black and there were also a few stars!
Then the two acrylic foils were attached / glued.
I also drilled a small hole for lighting

9
Step9: And here it is
Preview
Preview
Preview

Bin sehr stolz auf das Werk, und denke das kann sich auch sehen lassen :D

– – – 

I'm very proud of the work, and I think it's something to be proud of :D

10
Step10: Kommentar | comment

Lasst gerne mal ein Kommentar da wie ihr es findet!  

--

Feel free to leave a comment what you think!
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Air Assist Set
xTool M1 Air Assist Set
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood
1mm White Acrylic
1mm White Acrylic