Report
Heart Jewellery Stand
InstructionHeartJewelleryStandxToolComp
.xcs
Application scenario
Laser processing (100min)
Machine & module
xTool D1 Pro
20W
xTool P2
55WCompatibles · 7
Accessories
20W Diode Laser Module for xTool D1 Pro
xTool D1 Pro/D1 Air Assist Set
xTool Smoke Purifier
xTool 6-inch 410 CFM Inline Duct Fan
Material used
3mm Pine Plywood
3mm Red Glitter Opaque Glossy Acrylic
6mm Pine Plywood
19
574
Information
A wall-mounted anatomical heart jewellery stand using 3mm acrylic and wood! Combining functionality and fashion, this stand showcases my unique design, and features a combination of acrylic and wood materials that are completely customisable.
As someone who appreciates functional art, I have designed this stand to include as many places to put your jewellery as possible without diminishing its beauty! Using the 20W D1 pro for its precision cutting, I cut out and engrave the wooden section, while using the P2 for its ability to cut acrylic for the glittering red bottom half of the heart.
Instruction
1
Step1: Follow Canvas Cut Instruction
Preview
Open the .xcs file and follow the text instructions. Ensure that you have either deleted or disabled output for all text instructions prior to cutting. Cut desired pieces on your desired materials by toggling the output function.
2
Step2: Seal Wooden Components
Preview
Ensure to seal all wooden components with a varnish or a wax to extend its life.
3
Step3: Assemble Components
Preview
Preview
Preview
Using a strong wood or superglue, glue the three rectangular extruders to the wall fixture component. Ensure that the shorter side is to the left when gluing. Glue the acrylic heat component to the wooden heart component. Wait to dry. Then, glue the heart component to the assembled wall fixture.
Comments
Remixes
xTool Supplies Used in This Template