Report
3D Multicoloured Acrylic Mummy Halloween Clock
Instructionhalloweenclock
.xcs
Application scenario
Laser processing (12min)
Machine & module
xTool F1
2W, 10WMaterial used
3mm Black Acrylic
3mm Orange Acrylic
3mm Green Acrylic Sheet
31
988
Information
I made this project with a Xtool F1. Imagine what I could do with a P2 which is perfect for acrylic if I win this contest. If I have made this fun multicoloured project with an F1, you can do the same with a M1, S1, ULTRAs also so this is the perfect project if you would like to work with acrylic and you do not own a P2. xTool provides the clock within their accessories so give it a go to make a really fun project for Halloween.
Instruction
1
Step1: What you will need
For this project you will need 3mm acrylic in green, orange and black as well as a clock which xTool provides with their accessories.
2
Step2: Instructions
Preview
Preview
Preview
Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.
Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 3 or four passes.
3
Step3: Enjoy!
Now that all your pieces are cut, just assemble them together with the clock and voila! you have a fun fully functional clock for Halloween which will make the perfect gift for children and adults.
Comments
Remixes
xTool Supplies Used in This Template