Report
![[Laser cut and engrave] New Home Snoopy Plywood Basswood House](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/92a56d39-806d-4e94-811c-c65a96cfc61c?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
New Home Snoopy Plywood Basswood House
Instructionnewhomesnoopy
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool F1
2W, 10WCompatibles · 10
Material used
1/8"(3mm) Basswood Plywood
51
778
Information
With this project you will learn the settings to engrave Plywood.
Instruction
1
Step1: What you will need
You will need some Plywood or Basswood to make this project.
2
Step2: Instructions
When working with wood I will always recommend using masking tape to avoid any burning marks on the wood. I used 100% Power and 300 Speed to get a good finish. If you would like your design to go darker just re-engrave.
Laser engraving or cutting wood is always very smoky so please make sure you work in a very well ventilated area.
3
Step3: Enjoy
If you get any burning marks you can get rid of them with some rubbing alcohol but the masking take is always a good trick.
Comments
