Report
![[Laser cut and engrave] Baloon man battle - Puppet fight](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/dbc8d5b6-f9e6-4c6b-9c5d-74a828e95212?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Baloon man battle - Puppet fight
InstructionBaloon-game
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool P2
55WMaterial used
4mm basswood
4mm basswood plywood
61
689
Information
A great game for two people. Please be careful with needles! Risk of injury! The needles should be firmly fixed (preferably glued).
Instruction
1
Step1: Download the file and cut it with your laser
Preview
All parts are cut out in this step. Please note that a 4mm thick material should be used to ensure that the parts fit together. The holes for insertion are 0.3 mm smaller so that they fit perfectly. This may have to be adapted to the laser.
2
Step2: Assembly and gluing together
Preview
Preview
Preview
A ribbon or rope must be threaded through the holes. I used a fishing line and pulled the rope through. A knot must be tied at each end without much air.
3
Step3: Attach a Needle on each arm
Preview
A needle must be attached to each arm. Caution - risk of injury! The game is not suitable for children as there is a risk of injury.
4
Step4: Stick a balloon on and and let the battles begin!
Preview
Preview
Preview
Preview
Have fun while playing!
Comments
