HomeTemplatesDecorHome DecorDesk Decor
Courage
Report
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

D&D BARBARIAN CHARACTER TRACKER

Instruction
ScreenShot2024-12-22at4.54.58PM.png
ScreenShot2024-12-22at4
.54
Application scenario
Laser processing (60min)
Machine & module
xTool D1
10W
Material used
6mm Pine Plywood
59
1208
Information
      This is a D&D character tracker setup. This will keep track of all your stats easily while playing your RPG. the reason i designed and made this one is cause everything out there was too expensive and not exactly what i wanted, so i came up with this design and i am very pleased with it and hope you are too!

if you would like to purchase this file please go to my Etsy Shop and you can purchase it there:
use this link below

https://www.etsy.com/listing/1847646001/dd-barbarian-character-tracker

use code:CRAFTWITHCOURAGE4OFF  for $4.00 off select Items
Instruction
1
Step1: Cutting out the Peices

All parts should have the correct settings allready put in, so all you have to do is cut them out, your going to need 3mm magnets for this project to put in all of the holes, after cutting out all the parts put magnets into the all the holes.

Thats it verry simple let me know if you have any issues!

Comments
Remixes
xTool Supplies Used in This Template
xTool D1
xTool D1
6mm Pine Plywood
6mm Pine Plywood

License

Standard License