HomeTemplatesDecorHome Decor
stephcreated
Report
Laser cut and engrave
Project made with xTool M1 Ultra machine for Christmas.

Initial Ornament/Keychain/Car Charm

Instruction
Letters.xcs
Letters
.xcs
Application scenario
Laser processing (15min)
Machine & module
xTool M1 Ultra
20W
Compatibles · 10
Material used
3mm Basswood Plywood
38
218
Information
      The possibilities are endless with this floral designed letter. You size it up or down to make it a keychain, ornament or car charm.
Instruction
1
Step1: Open in XCS and customize
Preview
Preview
  • Open in XCS and customize if you like.
  • You can engrave a name on the letter
2
Step2: Laser
Preview
  • Select your material
  • Auto measure 
  • and prepare for cutting
3
Step3: Finishing Touches
Preview
Preview
  • Sand your letter if need be. I sanded mine with an 800 grit to make it really smooth
  • you can stain this once your done sanding and have cleaned off the dust
  • The photos attached are before and after sanding
Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Ultra
xTool M1 Ultra
3mm Basswood Plywood
3mm Basswood Plywood

License

CC0