Colorfull Heart Pendant

Instruction

colorful-hearts-pendant

.xcs

Application scenario

Laser processing (120min)

Machine & module

xTool P2

55W

Material used

1/8"(3mm) Blue Acrylic

1049

Information

      Love is in so many colors, therefore I have made a Colorfull Heart Pendant. You can hang it on a wall, or in your tree in the garden.

Preview

Cut out the basis of the colorful heart pendant. You cut this from black 3 millimeter acrylic. The value is 100 percent power and 20 speed.
Cut out the hanging love heart. The value is 100 percent power and 20 speed.
The hearts are cut per color with 100% power and 20 Speed. Click on the kerf option and set it to 0.16 for the 3mm acrylic. This causes the colored heart to click into the base of the pendant. You don't need to use glue, the heart stays tight.
The numbers are not used or cut out, so their output is set to off.
The colored numbers correspond to the colored hearts that are later clicked into the hearts of the pendant. These are cut precisely so that they are clicked into the hanger without glue.

Preview

We are now going to place the hearts in the base pendant. make sure you hear a click. Each heart only fits into the basic pendant one way. You may have to turn the heart over because otherwise it will not fit. Please note that all colors and numbers of the xcs file must be placed in the same place, because the hearts have their own place in the base.
Every heart has a number. The blue heart no. 1 is clicked into the number 1 of the base, which is exactly the size for this location. The black heart number 2, this is clicked into number 2 of the base. The orange heart number 3, this is clicked into number 3 of the base. The Blue heart number 4, this is clicked into number 4 of the base.The yellow heart number 5, this is clicked into number 5 of the base. The red heart number 6, this is clicked into number 6 of the base. The green heart number 7, this is clicked into number 7 of the base. The purple heart number 8, this is clicked into number 8 of the base.
Attach the chain to the "Love Heart" and attach it to the base pendant.
Fold the string in half and tie it in a knot. Feed the loop through the eye of the pendant and tie it.

Comments

xTool P2

1/8"(3mm) Blue Acrylic