Mushroom House
Instruction
my sweet little mushroom house
easy to make
i have here a wooden disk from a tree that was felled 2 years ago
you can also print out an oval disk and use it
the roof, so to speak, was created with the path tool
just make a nice shape
there is no wrong :)
the doors and windows are shapes from the XCS template
create a frame for them with outline
the window beams are 5mm thick rectangles
attention
the second house with its individual parts must be mirrored as it is placed on the reverse side
adjust the laser settings to suit your laser and your material
the score on the project is a help for the circles for painting
you can also set it a little lighter so that it is softer
i used acrylic crayons for the coloring
but I touched up the white with acrylic paint
white is always a bit difficult to cover well on wood
when gluing, i would always finish a house first and glue everything
then finish the second house and glue everything
when both are finished glue them together on the backside
Attention: always make sure that you are straight here
for the last gluing I recommend the clamps as shown in the picture because the wood bends a bit due to the coloring