Settings are on 20W M1 Ultra - choose appropriate settings for your particular machine.

I processed the entire thing on the honeycomb at its highest position in the M1 Ultra riser.

I recommend you check your tissue box with a set of calipers and extend the size to fit your specific box. Current measurements are at 111mm square by 126.26mm tall and this is a VERY tight fit over a “Kleenex” brand tissue box, which is what I wanted. 

You could also change the vector pattern design if you'd like. 

Settings are a conservative amount of depth on the engraving and I got a few light burn bleeds which won't be visible after I stain it (I'm going to stain purple). 

I used the recommended settings and cut the sides on 4 passes; this was way too many times. I did the top at 3 passes and it came out better, in my opinion. You could run it at 2 and check the progress for less charred cuts, I personally like the very dark edges. 

Easy peasy mini project; great for beginners like me :)