Report
Flying Dragon wood cutout
InstructionDragon
.xcs
Application scenario
Laser processing (12min)
Machine & module
xTool D1 Pro
5WCompatibles · 9
Material used
3mm Basswood Plywood
11
292
Information
My goal in mind was to make a character that looked intimidating and flowed really well. This dragon can be used for decor, a cool gift, and my personal favorite, a nerf target. The bottom stand is blank, so you can customize it to however you like it.
Good Luck and Happy Engraving,
Camp. Carsten
Instruction
1
Step1: Open the file
Preview
Import the file to XCS. Adjust the size to fit your material. I would recommend using 3 mm basswood plywood because otherwise the dragon might not fit on the stand. Feel free to adjust the width of the stand to fit the thickness of your material.
2
Step2: Engraving the project
Preview
Once you have finished ajusting the size, click the go to process button. (Reminder: Make sure to adjust the settings for thicker or thinner materials.) Once you have determined you aren't going to set the house on fire or accidentally engrave on the table, press start. The project should take about 12 minutes. When it is finished, snap your finished dragon into the stand and voila you've just made an awesome nerf target. If you despise shooting dragons, you can just use it as decoration instead.
Comments
Remixes
xTool Supplies Used in This Template