Report
![[Laser cut and engrave] Rooster Selfie](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/e8955d4a-6ecc-4a51-93f0-93127a40cd64?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Rooster Selfie
InstructionChickenSelfieOnly
.xcs
Show 1 more
Application scenario
Laser processing (120min)
Machine & module
xTool D1 Pro
5WAccessories
xTool Enclosure: foldable and smoke-proof cover for D1/D1 Pro and other laser engravers
Material used
White Tile
Titanium Dioxide
374
2337
Information
Image file completely adjusted in XCS and put on white tile using Titanium Dioxide
Instruction
1
Step1
Preview
NOTE- My laser settings will most likely differ from yours so always run test grids first.
Mix the Titanium Dioxide (TD) in a spray bottle (I use 1tbs TD to ⅓ Cup 91% Isopropyl Alcohol with 3 drops of food coloring, doesn't matter what color its used just to be able to see if you have good coverage.
After cleaning your tile spray wit the TD mixture and let dry - COMPLETELY
After drying carefully take tile and place in your XTool - BE CAREFUL THE TD WILL RUB OFF EASILY
Engrave image - I prepared image with above settings
Once completed just rinse off the TD with water the wash and dry.
NOTE to 5w owners, the 5w machine may be a little slower and somewhat limited but is is a tank. Don't let anyone say otherwise.
Comments
