Report
![[Laser cut and engrave] Wooden Tree Jewelry Rack](https://image-res.xtool.com/ali-res/community/making/fa45fe17-c3fc-4d74-8315-499a62afcb76.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Tree Jewelry Rack
Instructiontree jewelry rack
.xcs
Application scenario
Laser
Machine & module
xTool P2
55WCompatibles · 10
Material used
1/8"(3mm) Basswood Plywood
2134
13539
Information
Check out our amazing natural vintage jewelry rack in the shape of a large tree! It's perfect for holding all your favorite jewelry pieces and adding a stylish touch to your space.
Bill of Materials
xTool parts
1/8" Walnut Plywood Sheets (6pcs)/44111
x1
* Currently only available in US store
Instruction
1
Step1
Preview
Preview
Import the file into the XCS software. The drawing file has two canvases - the tree jewelry rack and its base. Arrange both designs on the wooden board, as depicted in the picture. Click auto-measure, fine-tune the parameters, and click process to frame the cutting range. When completed, start cutting.
2
Step2
Preview
Preview
After cutting, assemble the three parts together according to the picture.
3
Step3
Preview
Finish! Now you can decorate the tree with your jewelry!
NOTE
Once the assembly is finished, it is advisable to apply wood glue to the joints for added strength.
Comments
