HomeTemplatesOffice & StationeryDesk Organization
Funnybunny
Report
[Laser cut and engrave] Walnut Wooden Storage Box
Project made with xTool P2 machine for Laser cut and engrave.
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Walnut Wooden Storage Box
Project made with xTool P2 machine for Laser cut and engrave.
[Laser cut and engrave] Walnut Wooden Storage Box
[Laser cut and engrave] Walnut Wooden Storage Box
[Laser cut and engrave] Walnut Wooden Storage Box
[Laser cut and engrave] Walnut Wooden Storage Box
[Laser cut and engrave] Walnut Wooden Storage Box

Walnut Wooden Storage Box

Instruction
Walnut Wooden Storage Box.xcs
Walnut Wooden Storage Box
.xcs
Application scenario
Laser
Machine & module
xTool P2
55W
Compatibles · 11
Material used
1/8"(3mm) Walnut Plywood
205
1707

Instruction

1

Step1: Import

The XCS file is imported into the software and the dimensions, machining position and machining mode are confirmed. Note: The file in this case is designed with 3 mm walnut plywood. If you choose a different material type and thickness, please adjust the laser processing parameters and file size according to the actual material.

2

Step2: Setting

The walnut plywood is placed into the processing area, making sure the material is flat. Then cut the plywood with the laser. Note: The laser parameters indicated here are the official recommended parameters for 3mm walnut. If you prefer a different effect, please adjust them manually.

3

Step3: Assembled

Assembled according to the example picture can be installed.

Comments

Remixes

xTool Supplies Used in This Template

xTool P2
xTool P2
1/8"(3mm) Walnut Plywood
1/8"(3mm) Walnut Plywood

License

Standard License