Report
![[Laser cut and engrave] The Mobius ring](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/9052773d-868d-427d-923f-94d722414cda?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
The Mobius ring
Instruction莫比乌斯环图纸
.dxf
Application scenario
Laser (180min)
Machine & module
xTool P2
50WMaterial used
1/8"(3mm) Basswood Plywood
41
1224
Information
The Mobius ring was designed with the aid of Rhino modeling, and was sliced, and the slices were connected successively according to the number to form the Mobius ring, and it was fixed on the disc equipped with a motor at the bottom. When the disc was rotated, a visual effect of infinite circulation would appear.
Instruction
1
Step1: The six drawings were cut out of A4 size 3mm basswood boards and arranged in numbered order
Preview
Cut six planks, according to the 3mm basswood planks of A4, in the order of numbering
2
Step2: They are connected in turn according to the model and number
Preview
According to the model photo and number, the slices are connected one by one to form a Möbius ring
3
Step3: Mount the motor on the disc
Preview
The motor is mounted on the disc, and the child core pie and its expansion board are installed, and the program is set so that the disc can be rotated.
4
Step4: Insert railings around the disc
Preview
The cut wooden railing is inserted into the disc at the bottom to shade the child's core pie, but you can also do otherwise.
Comments
