HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
SuperVectorGirl
Report
Laser cut and engrave
Project made with xTool P2 machine for Christmas.
Project made with xTool P2 machine for Christmas.
Laser cut and engrave
Project made with xTool P2 machine for Christmas.
Laser cut and engrave
Project made with xTool P2 machine for Christmas.
Laser cut and engrave
Project made with xTool P2 machine for Christmas.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Christmas Countdown House

$ 4.99$9.98 You are saving $4.99
ChristmasCountdownHouse.xcs
ChristmasCountdownHouse
.xcs
Application scenario
Laser (60min)
Machine & module
xTool P2
55W
Compatibles · 8
Material used
3mm Basswood Plywood
Redeem with499Credits
Information
      File comes with 12 sets of numbers, allowing you to countdown from 32 days. Duplicate more numbers to countdown from a higher starting number.

This countdown house was made on 1/8 inch (3mm) wood, you will need to adjust the slots for other thicknesses. Do not resize the file, as it will affect the slots. This project can be made on small lasers using 3 to 4 sheets of 12 x 12 inches plywood.

Finished project measures 10 inches high by 10.75 inches wide.
Comments
xTool Supplies Used in This Template
xTool P2
xTool P2
3mm Basswood Plywood
3mm Basswood Plywood

Purchase Terms

Risk-free commercial use. Read more license.
Instant access and unlimited downloads of files after payment.
No returns/exchanges for digital items.

License

Commercial